If you wanted to order 4 of the SnapPads for 10 inch Octagon or Round jack feet you'd need to order a quantity of 4 of the part # SP84FR and you'd be set. view full answer...
The Tekonsha Prodigy P3 # 90195 only needs to see a 12V power coming from switch activation. It has an internal inertia-based sensor that will sense the braking effort and relay that to the trailer.
The Roadmaster Stop Light Switch # RM-751490 is an option that can be used due to the location of the brake switch wiring on your 2018 Jeep Wrangler JL. It also won't require you to tap into the hard to reach circuit but instead you will run one wire a 12V positive and the 2nd wire to the... view full answer...
For your 2018 Jeep JL Wrangler, I recommend using a weight distribution system, the Husky Center Line Weight Distribution part # HT32215 for 2" hitch ball or part # HT32216 for 2-5/16" hitch ball. The main reason I recommend a weight distribution system over airbags like the Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL60829 is because the weight distribution system has integrated sway control. Now, you may not think that because you have a light trailer that trailer... view full answer...
Yes the Go Power Retreat Solar Charging System with Digital Solar Controller # 34272635 is designed for use with 12 volt battery banks like what you have so it would fit and work great. view full answer...
I recommend going with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This is a great option that allows you to easily connect your 2018 Jeep JL Wrangler to your motorhome with the included 6-Way to 7-Way adapter.
Once the wiring is installed all you will see is the 6-Way socket on the front of your Jeep and you can then add the Charge Line Kit # RM-156-25 to keep your battery from draining. I have attached some installation videos for you to check out as well.
For... view full answer...
You can use the Roadmaster Base Plate kit part # RM-521453-4 that fits your 2018 Jeep JL Wrangler with your Duncan Towmatic II tow bar but you do have to use an adapter # RM-038.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does... view full answer...
For your 2018 Jeep JL Wrangler (New Body Style) I recommend the Draw-Tite Max-Frame Class III Trailer Hitch # DT78MR because it features the highest capacities available for your vehicle (4,500 pounds towing and 675 pounds of tongue weight) which just indicates a stronger, more durable hitch even if you don't plan on reaching its limits. It also features a longer receiver tube that will make it easier to attach accessories with the Jeep's rear-mounted spare tire.
Its custom design will... view full answer...
For the rear sag on your 2018 Jeep Wrangler JL, I recommend the Timbren Active Off-Road Bumpstops - Rear Suspension - 2,400 lbs # TABSJRJK does not allow for spacers so it won't reduce your sag much.
My recommendation that will allow adjustment to fill the space and reduce sag is the Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear # AL60829. If you want the compressor for adjustability at anytime you can use # AL25980. view full answer...
I spoke with my contact at Tekonsha and unfortunately there is not yet a plug-in brake controller harness available for your 2018 Jeep JL Wrangler Unlimited. They are still working on fitting and developing the harness for the JL model but it is not yet available and he wasn't sure when it would be.
Most likely a plug-in harness will come out at some point but in the meantime your only option to install a brake controller like the Prodigy P3 # 90885 is to hardwire it like you mentioned.... view full answer...
Sounds like you are looking for the crossbar that is used on the Roadmaster flat towing setups. The good news is that if you ordered a Roadmaster Sterling Tow Bar part # RM-576 it comes with this already. For the missing arms of your base plate kit you'd need just the part # RM-ARMS. view full answer...
We do have the replacement rubber trivet support bumpers for the Furrion stove # FGH4ZSASS that you referenced as part # CFGH4ZSASSTRIVETSPRT. view full answer...
Demco has confirmed that their Commander Tow Bar part # DM9511012 does work with the Tabless base plate kits like the part # DM9519339 that fits your 2018 Jeep Wrangler JL. Sometimes tow bar heights and base plate heights don't line up perfectly. That is why companies like Roadmaster created high low adapters like the # RM-048-6 which can give a 6 inch rise or drop. view full answer...
We definitely have a few options available for your 2018 Jeep Wrangler JL with LED tail lights. That being said, there isn't one that is specific to the models with LED lights. However, the proper kit will depend on how you are setting the vehicle up to be towed.
If you are not going to be using a supplemental braking system, the Roadmaster # RM-154 will get all your lights working. This included all the diodes and 4 Flat plugs needed. If your towing vehicle doesn't have a 4 Flat though,... view full answer...
Yes, the Air Lift 1000 kit part # AL60829 is a fit for your 2018 Jeep Wrangler Rubicon. As long as you use the included spacers it will be at the correct height for your vehicle. There's no need for any additional spacers. view full answer...
Yes, the Demco Tabless Base Plate Kit # DM9519339 that you referenced is confirmed to fit your 2018 Jeep JL Wrangler Rubicon with the factory steel bumper and it will work great.
In order to flat tow your Jeep you will also need a compatible tow bar, safety cables, a lighting solution, and a supplemental braking system. Just in case you still need some or all of these components I will list my recommendations below.
Tow Bar - Demco Excali-Bar III # DM9511013 (safety cables are included!)
Lighting... view full answer...
The Solera 13 Ft Slider in Black w/ Black Hardware # LCV000165061 referenced in your question does not include an aluminum cover that wraps around the awning when it is retracted. We do not currently have this type of product available.
All of the necessary mounting hardware is included with the Slider. It is 156 inches wide with a box width range of 146 inches to 151-3/4 inches. I have attached a video demonstration of this product so you can see exactly what all is included and how everything... view full answer...
For the 2018 Jeep Wrangler JL that you have we have the Tekonsha 4-way kit part # 118786 which is a confirmed custom fit and would work well. This installs by plugging inline with the tailight harnesses of your Jeep as you can see in the install instructions I attached below. view full answer...
For your 2018 Jeep Wrangler Unlimited Sport with LED taillights the Tekonsha kit part # 118786 that you referenced is a confirmed fit and will work great. This kit has the highest amperage rating which means it will be the most resilient to wiring shorts and overdraws, and installs very easily so it's overall the best choice.
I attached an install video for this on a similar 2018 Jeep Wrangler JL as yours for you to check out as well. view full answer...
The current version of the Blue Ox Patriot is the part # BLU37TR so that would be the Patriot to use. For a tow bar I really like the Blue Ox Avail part # BX7420 which has non-binding arms that make it easier to connect and disconnect from and has longer arms which I really like since it allows the towed vehicle to track better behind the tow vehicle. It also comes with safety cables too. view full answer...
We have the Convert-a-ball Ball Mount part # AMSC4HD which has a drop of 4 inch, a rise of 2-3/4 inch and an overall length of 10 inches from hitch pin hole to ball mount hole center.
If you wanted something more budget priced that is instead 9 inches long we have the # 2753. view full answer...
Go To Results